Let’s Talk About Paint: How to Paint Walls

Last week I went over my favorite tools and products for painting.  Today I’m going to cover my process for painting walls.  Painting walls really isn’t difficult so if you have the time and aren’t afraid of getting a little messy it’s probably not worth hiring out,* especially if you’re working on a budget.

paint_part_2

There are multiple different techniques for painting, but this is what works well for me. If you’ve got your own awesome tips, tricks, and techniques feel free to chime in in the comments!

If you have carpeting, you’re going to want to drop cloth the bejeezus out of it (unless you’re planning on replacing it, then make sure you paint first and voila! Built-in drop cloth).  I’ve had hardwood floors for years and, um, don’t actually do much of anything to protect them.  If you drip a little paint you can wipe it right off while it’s still wet and even if you don’t catch it before it dries you can scrape it off or use some Goof Off.   I really just use a big scrap of cardboard to pile my roller tray and paint can on and just shove it around the room with me as I go. Carpet is not as forgiving, so you’re going to want to be careful about protecting it.

Cutting In

I start by cutting in.  In a perfect world you’d keep a wet edge everywhere you go, but if you’re working solo that’s not always practical. I cut in using a 2″ angled brush (I hardly ever tape anymore) and make sure I cover at least 4″ or so away from the edge so I don’t have to worry about my roller bumping the ceiling or trim.  When cutting in you also want to feather out your wet edge so you don’t end up with a line as it dries.  Basically, once you have most of the paint off your brush (or edger) come back over inner edge of your paint and smooth it out any excess paint.

To get a nice clean line (without tape!) I start by dipping just the tip of my brush into the paint.

***It’s important to have a good brush if you’re going to do this. I used a crappy one once and it was a gigantic mess!  I’ve been super happy with the Wooster Shortcut for cutting in and I think the short handle makes it very easy to control.***

Set the brush down on the wall a little bit away from the edge,

paint_process_1

Then smoosh the bristles down a bit so they fan out slightly.

paint_process_2

Then slowly sweep the brush towards the edge.

paint_process_3

And finally, drag the brush downward (or across for horizontal edges) keeping only the very tip the bristles against the edge. You can see I also still keep the brush at a slight angle so only a small section of it is coming into direct contact with the trim.

paint_process_4

Work slowly and don’t load too much paint onto your brush.  If you’re worried about your cutting-in skills, you can still tape your edges and practice to see how much paint really ends up on the tape.

Walls

The open areas of walls are the easy parts.  Load your roller up with paint and then use the textured part of your paint try to roll off excess.

I work in a N pattern on the walls (most people say W, but I tend to actually make an N or  M)–roll your paint on in a 2-3 foot N….

paint_walls_1

….and then roll right back to fill it in.  This distributes the bulk of the paint from your roller and then spreads and evens it out as you come back over it. I set my roller down to get the picture so I starting rolling again on the same side I started with.  If I’m not pausing in between I’d naturally roll my N then double back the way I came, just slightly off-set… whatever works.

paint_walls_2Your may have to go back and forth a couple times to fill it in nicely, but don’t add more paint to your roller, just work with what’s already up on the wall.

paint_walls_3

Once you’ve filled in your N then you can go back for more paint.  Start a new N (or M or W) shape, slightly overlapping your previous section and repeat.

paint_walls_4

When working with a roller make sure you don’t have too much paint on it (it should be saturated but not dripping) and roll slowly.  This will minimize both paint drips and spray from the roller.  You also want to slightly overlap your previous section each time.  This keeps a wet edge and helps each section of paint better blend into the other.  You also don’t need to put a lot of the pressure on the roller–remember, you’re rolling, not scrubbing.  If you find yourself scrubbing with the roller it’s probably a sign you need a new cover.

If you need to stop partway through (waiting a couples hours until the next coat, ran out of time for day, etc) you don’t have to wash out your brush and roller.  Wrap them in plastic wrap, and if you’re not picking back up until the next day, stick them in a cool place like the fridge (we were out of room in our fridge, but our basement’s pretty cold so I stuck mine there).

No too scary, right?

Also, how absolutely amazeballs does this color look????

paint_walls_5

Let’s Talk About Paint

Part 1: Supplies

 

*Super tall walls and stairwells are TOTALLY worth hiring out in my opinion, but I’m not so good with ladders. Also ceilings. Painting ceilings is a bitch.

Let’s Talk About Paint: Supplies

I started painting the dining room today.  I got about 1/2 done but now have to shove the furniture into the other corner so I can paint the other 2 walls.  I’ve done quite a bit of painting over the years–walls, trim, furniture.*  I know not everyone has painting experience though so I’m going go over the supplies I use, and then run through my process.

paint_talk_1

At the time of writing this I have no sponsors, no advertisers, no one slipping me convenient wads of cash behind the scenes.  This is what I use and my honest, unbiased opinions.

Priming:

Almost all paints I see these days are a paint + primer, but a separate primer is still definitely worth on some things.  If you’re painting over bare wood or drywall, you should probably prime.  If you’re painting over a finish that may be a little grimy (kitchens, homes previously owned by heavy smokers…. that sort of thing) you’ll probably want to prime.  I’ve been using the water-based Bullseye 1-2-3 primer and have been pretty happy with it.  An oil-based primer will give you even better adhesion, but will also need more ventilation and special cleanup.  Also, you can use latex paint over oil-based but shouldn’t oil-based over latex.

Walls:

I always use an Eggshell finish on walls in all rooms.  Sure there are lists that specify certain finishes for certain rooms based on durability, but my go-to is always eggshell.  It’s cleanable, but not shiny (quick n’ dirty breakdown: the shinier the finish the more scrub-able it will be, but shinier will also highlight any imperfections or texture changes on the walls). If you have kids who are prone to drawing on walls, you might want to bump up the sheen in problem areas.

My paint brands of choice for walls are Behr  (Home Depot) and Clark + Kensington (Ace). They’re pretty inexpensive as far as paints go, but have pretty respectable coverage.

Trim, Cabinets, and Furniture:

I used to always use a high gloss on furniture, and then I discovered satin. To me the satin is more in the range of a “factory finish” level of shine for most things and the high gloss can leave things looking obviously painted. Painting my kitchen cabinets turned me into a Benjamin Moore Advance convert (fangirl!).  I’d read good things about it so decided to give it a shot.  It’s a little pricey, but the coverage is excellent and the finish is beautiful. I was raving to my sister about it and when she saw our cabinets her comment was “I can see why you liked this some much.”

We also used Advance (satin finish) on our trim… after the kitchen.  I went to buy Advance but the Ace near us didn’t carry Benjamin Moore since they’re too close to another BM dealer and the guy there highly recommended Clark + Kensington. I’d used it on walls and been really impressed for the price point and at half the price of Advance I thought sure, why the hell not.  3 coats plus primer (and could probably use another) is why the hell not. And painting trim is a beast so I think it’s better to splurge on better coverage here (but I’ve personally never found the pricier paints worth it for walls). After the kitchen we switched over to my original plan of Advance. It still needed 2 coats + primer, but was definitely looking good at that point (and if you’re only using about 1/2 the amount of paint, it’s not really even a splurge anymore)!

Tools:

paint_supplies_1The basics: paint tray, roller, roller covers (don’t be afraid to splurge on roller covers, or at the very least, don’t reuse your covers to death –>guilty) drop clothes, 2″ angled brush. I really like the Wooster Shortcut, but there is a little bit of personal preference involved.  This is another area where you don’t want to choose the absolute cheapest option and take good care of your brushes.

 

paint_supplies_2Very useful extras: pole/extender for your roller (I really wish I had an adjustable one!), painters pyramids (if you need to prop up something flat to paint the edges), paint pail (sure, you could use any old plastic container, but the handle and magnetic brush holder are pretty sweet), paint tray liners (they make clean up waaay easier, I dump as much extra paint back into the can, let the rest dry, and then peel it off and reuse the liner**), and a flexible pour spout (they conform to both gallon and quart cans, make the paint easier to pour, and prevent paint from clogging up the rim of the can).

 

paint_supplies_3Marginally useful extras: Edger (I have had various levels of luck with these, they work well in some situations but not others, and some of them constantly fall apart or get paint where they shouldn’t), paint guide (like the edger it works well in some areas and less so in others, if you use one keep a damp rag around and wipe it down constantly).

To Tape or Not to Tape?

I used to be a taper because I was told that was just a normal part of prep work… then I read an article over at Apartment Therapy and it changed my life. They claimed that taping was actually more time consuming and even a little more risky than just cutting in by hand. So I tried cutting in the old fashioned way…and it was wonderful!  You need a good quality angled brush and a steady hand, but if you go slow it’s not that hard.

The “risky” part of taping is that it can lead to overconfidence because if your tape is not perfectly sealed or you’re a little too globby with your paint it can ooze underneath.  Also, there’s a risk of peeling off some of your new paint if you don’t time your tape removal right.

Ultimately it comes down to personal preference.  If you’re new to the painting game you may still want to tape everything, but maybe still try your hand at cutting in carefully and see how much paint you really get on the tape.

 

*Ceilings are hands down the worst.  If I ever want to repaint our ceilings I may just hire it out.  Really.

**Cheap, green, whatever you want to call it

Dining Room Day 20: Enough with the Mudding!

I’ve been obsessing over this patch job for WEEKS now!  The better the mudding comes out, the better your paint will look… especially if you pick a paint with any sort of sheen to it–that sheen will just make every imperfection pop.  I happen to like eggshell for walls, it’s not shiny, but it’s not flat either (and if you have kids or a tendency to beat the crap out of spiders you find on your wall, you really don’t want a flat finish because it’s not cleanable At All).

Eyeballing your finish isn’t quite enough; if you really want it to turn out well run your hand over it.  You’ll end up feeling bumps you might not have caught otherwise.* After things were feeling pretty good with the hand test (not perfect mind you, but pretty good) I went over everything with a coat of primer.  Once everything’s an even color it’s also easier to pick out areas that looks a little off, just make sure to check it out as the lighting changes throughout the day.

DR_20_1

I was crazy happy with how good the spot looked after priming.  1) It looked way more even than expected and 2) the texture left the primer and roller seemed to be just enough to match the subtle wall texture that was already there.  I was a little worried about that and had started to look into some of aerosol texture sprays, but think we may be ok!

I also (mostly) finished painting the trim.  I started last week on our day of rest after Vegas and got one coat of paint on about 1/2 the room.  This weekend I got almost everything else done (I couldn’t reach everything since our table is shoved against one wall, so I’ll be working in sections). Trim is the most tedious thing to paint I think.  Walls are a piece of cake, but trim… it’s more of a souffle–time consuming and finicky.

DR_20_2

Because I’m impatient, I also put a little patch of paint up to see how it looked against the trim.

DR_20_3

SO excited to get this room painted!

I switched my day off for this coming week from Monday to Wednesday to help out a co-worker and it ended up working well for me too.  I get a break from manual labor and can hopefully dive into painting on Wednesday.  Karma.

 

*Lighting and shadows can be tricksy

Dining Room Day 7-8: Priming

I spent the last week working on smoothing out the patch job.  It’s a fairly timing consuming project since you have to wait for the previous layer of joint compound to fully dry before you can add another… which pretty much means waiting a full day in between coats.

With the walls well underway I decided to start tackling the trim.  The baseboards are going to come later, but I wanted to get the door and window trim and the crown molding painted before painting the walls.  I think it’s easier to paint trim first (personal preference) and I could knock out the trim while still finishing up the patch job on the wall.

Priming isn’t that exciting, but solid prep-work is important.  All the trim got wiped down with a liquid deglosser and then got hit with a coat of primer.  What I’ve read about using deglossers is that they tend to lose their effectiveness if they sit too long, so I worked in small sections.  Deglossed the kitchen doorframe, let it dry to the touch (about 10 minutes), primed. Then I moved on to one of the windows, degloss, dry, prime… next window, etc.

I’ve been using Bulls Eye 1 2 3 primer and have been pretty happy with it. If you can stomach it, an oil-based would be even better, but it’s cold here and the windows are staying closed.  No matter which primer you choose just make sure to follow the directions on how long to wait between coats because if you don’t give it enough drying time it won’t end up bonding as well as it should.

DR_prime_2

If you’ve never primed anything before, don’t panic if it looks splotchy and awful, because it will.  It will make your top coat(s) look SO much better though and it will reduce the number coats you’ll need.

After priming, a bunch of old nail holes and assorted wear spots popped up. I should have touched them up before priming, but I wanted to illustrate the shape our trim was in.

DR_prime_1

All the top edges were like this from years of, I dunno, mounting curtain hardware directly to the trim? There were also holes and chips like this everywhere.  Bits of the decorative moldings were chipped and the inside frame had gouges around the nail heads holding it in. I didn’t manage to get a good shot of the sill, but it was even worse.

DR_prime_3

I touched them up with wood filler and then went back the next day to sand and spot prime.

DR_prime_4

I’d say it’s looking better, but it really still looks like a construction zone here.

Dining Room Day 2+: Patching

So on Day 1 we demoed out the bookcases and most of the baseboards and then patched in some drywall over the now exposed lath board. Today we started taping and mudding all the drywall seams.

I started with a self adhesive mesh tape on the all the flat seams and then covered them in a layer of joint compound. I used the mesh tape because that’s what we still had from patching smaller areas.  It’s not actually recommends for larger areas.  Oops.* You can see how gappy the join is between the 2 pieces is here.

DR_patch_1

For joint compound we’re trying out this stuff since it comes pre-mixed (lazy) and claims to be dust control.  We’ll see.  If we were working on a much larger area I may have gotten the stuff you mix yourself, but we’re trying to keep things as simple as possible.

DR_patch_2

After the flat seam got a layer of joint compound I tackled the inside corner.  The first video I watched recommend a corner trowel, but I have a about 4′ worth of corner… did I need to buy a specific tool?  Really?  Then I watched this video of how to tackle an inside corner without a corner trowel.  Ok, I got this.

For corner seams you need the paper drywall tape (really need).  It come pre-creased so you just have to rip a piece as long as your corner and fold it in half so it fits right inside the corner.

DR_patch_3

This stuff is not self adhesive so you will have to put down a layer of joint compound first.  Be generous but not gloopy, and if you’re worried about how much you’re putting on err of the side of a little too much.  I ended up with a small bubble since I didn’t lay down enough joint compound in one spot.  Oops.

DR_patch_4

Once you’ve added a layer of joint compound on each side of the corner, press the tape into place with your fingers so it sticks.  Next, take your putty knife and scrape down along the tape with a firm even pressure.  This will more solidly adhere the tape and sort of squeegee out any extra joint compound.  Then do the same thing on the other side of the tape.

If you’ve decided to forgo the corner trowel to save yourself $6** you’ll just have to work one side at a time.  Now you’ll layer joint compound over the tape like you would on all the flat seams.  Wait for your first layer to dry before tackling the other side otherwise your putty knife will just muck up the nice smooth joint compound on the first side.  Like everything else in drywall it will probably take several coats, so one side, dry, other side, dry, and repeat.

We’ve got some fun depth changes and assorted crappiness happening here so I’ve been working away on getting everything feathered out.  This video was super helpful in getting a technique down.

After a few evenings of work it’s starting to look pretty decent, but I definitely have a little more work to do.

DR_patch_5

 

*There’s actually some conflicting info about which tape you should use when… but the general consensus is that the mesh is ok for small patch jobs, especially with plaster (but should be used a quick setting mud), but paper tap should be used for pretty much everything.  Research first people.  I think we’ll be ok though… I’d be a little more worried if we were doing the whole room.

**Yeah, I know, it’s the principle of the thing.

Day 1: Dining Room Demo

After deciding on the Dining Room as our next project we detoured a little bit in January to follow along with Apartment Therapy’s January Cure.  I think this was a good call to allow us to refocus a little bit on the house as a whole and tackle a couple of smaller projects.

So, the dining room…. it will be a project, but we have a plan! We started by removing the bookcases.

The first one came out really easily.  Despite all the screws it wasn’t actually attached anywhere so we just had to pull it out and haul it into our garage (without getting impaled by any of the screws).

DR_demo_1

The second bookcase was an entirely different story. This guy was actually fully built in.  We unscrewed any screws we could find (2) but there were still nails holding it in place.  The nails were sunk deep enough that we couldn’t pry them out so the bookcase wasn’t budging.  Demo time.

DR_demo_2

After some quality time with a crowbar, a hammer, and some brute strength the bookcase was in shambles.

DR_demo_3

And eventually we were left with this (and a bunch of suspiciously pointy scraps of wood so we are totally prepared for a vampire invasion!)**

DR_demo_4

Awesome, right?

We already knew there was some wall damage behind this one.  One of the side trim pieces popped off a while back so we could see some exposed lath board so this wasn’t a total shock.  I had kept my fingers crossed that the wall behind the bookcase would still be ok… nope.

The weird thing going on here is that the main walls were drywalled at some point so what you’re seeing here is a combo of drywall and plaster.

I demoed out the remains of the plaster (which is remarkable satisfying by the way) and Matt tackled the baseboard. The baseboard did not want to budge, but we need to replace all of it (patching would have been nearly impossible).  I had to go make a hardware store run in the middle of it to get a large crowbar so we could get some more leverage now.*

DR_demo_5

Now that the demo was done we had to start putting it back together.  We had picked up some drywall*** and started cutting it down to size.  Somehow whoever drywalled the first time managed to make wobbly cuts all around this opening.  How is that even possible? You get a straight edge, a utility knife, score, snap, and voila! Straight line.  How do you mess that up?

DR_demo_6

Our patching got a little wonky along the bottom because of the way we had to cut down the drywall to get it home in the first place, but that will all get covered up by new baseboards anyway so I’m not going to stress about super smooth finishes down there. Evening out the rest of the wall will probably take us a while though…

 

*The cashier asked me how my day was going and looked mildly frightened when I responded with “Well, hopefully better now!” while wielding a 3′ crowbar

**Don’t talk to me about sparkles.  I really want the t-shirt I saw that said “Then Buffy staked Edward.  The end.”  Also, this is totally worth watching.

***FYI a 1/2 sheet of drywall barely fits inside a compact car and people will probably laugh at you while you try and wedge it inside (especially if you’re already mildly panicking because it started to rain) and you may slightly damage the rubber seal around the door frames.  Thanks for volunteering my car Matt!

AT January Cure Week 4

This was a really light week for me since most of it was addressed when we moved over the summer.

Monday: Media Fast

Ugh, I HATE the media fast.  I tried.  I did.  I spent and hour measuring and hanging curtains in our dining room, I did dishes in a timely fashion… and then I went back the the computer.  Fail.

Tuesday: Lighten up the Living Room

The focus on this one was paring down your accessories… which we did when we moved.  Our decorative objects sat packed away for months after we moved so I was able to be a little more objective when I unpacked and placed them.

Wednesday: Cabinet Clean-out

Again, done during moving.  Nothing makes you more willing to throw stuff out than the prospect of packing it up and hauling it with you.

Thursday: Look Through Your Linens

My closet clean-out choice was our linen closet… but we don’t tend to collect linens anyway so there wasn’t much that needed to be done.

Weekend: Flowers + Bathroom

Wow… I failed at the weekend…or won the weekend… I’m not sure which.  Friday night We decided to try and get into to the concert at Paisley Park.  It was announced on Twitter, tickets were only at the door, and there was no mention of whether or not Prince would be preforming (but I guess sometimes he just randomly does).  But it was funk night with Pho and Graham Central Station so Matt really wanted go.  Participating in a party at Paisley Park with a possibility of a Prince performance is just one of those things you should try and do if you live in the Twin Cities.

So we went, we got in, we danced, and Matt even saw Prince wandering around*.  We left around 1:30 because my feet were killing me** (and it was after the scheduled bands were done) so we didn’t get home until after 2.  As far as we can tell we didn’t miss an impromptu Prince performance, so I don’t feel too bad about being the one to make Matt leave.

Why am I mentioning this all when I should be talking about Cure progress?  Because I usually go to bed around 10 so this was a crazy late night for me.*** I woke up on Saturday feeling mildly hungover, and I had only had wine with dinner the night before.  I then proceeded to accomplish absolutely nothing on Saturday.  After dinner Matt suggested a trip to the hardware store to pick up outlets so we could try and fix that fiasco on Sunday, but I declined because then I would have to put on real pants.

On Sunday we actually Got Shit Done.  Some shit at least.  We went to the hardware store, got new outlets, found a new light fixture for our pantry, and picked up so extra storage bins for the basement.  We also picked up another sheer panel for the dining room and weekend flowers while we were at Target.  I got 3 different vases out of these $5 spray roses and the greenery left over from week 1.  Pretty sweet, huh?

ATCureFlowers4

Matt attempted to replace the kitchen outlets and then we discovered that they’re on the one breaker in our house that’s a 20 amp instead of a 15.  Doh! This might explain some of the earlier issues.  We’re just so goddamn brilliant sometimes. We didn’t want to head back out so Matt tackled the pantry light instead.  We had to convert a wall mounted lamp to add a pull chain and there was success all around!

We also got some assorted crap moved out of the living room, did a general clean of the bathrooms (no deep clean needed since we did that as we did the makeover) and tried to corral the paperwork that has a tendency to accumulate in the dining room… so it’s not like I completely slacked off this weekend.  I also worked on a couple mini-projects that will be putting an appearance later.

Oh, and because it’s bathroom weekend (and I clearly haven’t rambled on enough yet…) here’s my current though for the micro-bath.

microBathMoodBoard

 

*I saw the silhouette of a short guy with a big afro with his back to me, so I guess I did too?

**Matt is under strict orders to never let me wear those shoes again if we’re doing any significant amounts of standing/walking.

***Yes, I know, I’m old.

A Little Dining Room Progress

I know I’ve announced the Dining Room is our next big project, but I’ve spending January focusing on Apartment Therapy’s January Cure since it’s nice to spend some time doing a whole house refresh + clean. I haven’t been completely slacking on the Dining Room though.  This week I made use of my media downtime assignment (which I mostly failed out by the way….) to work on curtains for the dining room.

Yes, I’m just going to need to take them down again once we start painting, but it looks nice for the moment and the hard part (getting the holes drilled in the right spot) is done.

DRcurtains7

Anyone who spends a lot of time googling decor advice/reading design blogs/perusing Pinterest can probably tell I broke one of the most common design “rules.”  But rules are made to be broken and I’m a rebel.

What is usually recommended when hanging curtains it to hang them higher  and wider than the window frame.  Wider, check.  Higher… not so much.  But here’s the thing, the logic behind this piece of advice is to make your windows look more dramatic and you can use it to fake a bigger window or a centered window.  The problem is that I think there’s an underlying assumption that you’re hanging curtains in newer construction–dinky moldings, average ceiling heights, that sort of thing.  Here we’ve got nicely tall ceilings, big, and some lovely window trim.  If I had hung the curtain rod higher than the window it would get squashed in the space in between the top of the window molding and the crown molding.  It would also hide our window trim.  No beuno.

DRcurtains8

Instead I opted to hang the rod across the the “blank” area of the trim so the fancy molding peeks out over the top. It’s still nice and high, but not overly competing with the charm of our trim, which is one of the reasons we picked this house out in the first place.

Moral of the story, there are no hard and fast design “rules.” There are a number of really good suggestions out there that will make sense for a lot of people, but if it’s just not working for you, don’t fight it, no matter how often it pops up on Pinterest.*

The curtains are super cheap IKEA VIVAN panels (no longer sold apparently) that I spruced up with some curtain rings and chunky finials.  The sheers are from Target and just held in place with inexpensive tension rods.**  I opted for sheers again like I did on the kitchen because we’re on a busy-ish street and our windows are about 2 feet from the sidewalk so some semblance of privacy is nice.

Both the curtains and sheers needed to get hemmed so I pre-washed everything first. It’s usually a good idea to pre-wash anything you may need to wash again in the future since there can easily be some shrinkage.  Even though I can’t say I wash my curtains with any regularity, they can get dusty (and furry around the bottom in our house) so being able to toss them in the washer and not worry too much is worth the added step of pre-washing.  In my opinion pre-washing > hand-washing.

DRcurtains3

After everything was washed and dried I ironed it all nice and smooth and hung up a panel to mark my hem height. My personal preference for curtains to have them just skim the floor.  I opted for a wide hem so I didn’t have to cut any of the fabric off (in my experience these curtains don’t rip straight at all), I just doubled the fabric over to make a nice smooth hem and give a little weight to the bottom to what are pretty light-weight curtains.

Press.

DRcurtains5

Press.

DRcurtains6

Sew.

You can either run it through a sewing machine or hand stitch.  Hell, you could use some fusible webbing and I won’t judge you–if someone is inspecting your curtain hem when it’s within a few inches of the floor they’ve got some issues.  I haven’t decided which I’m going to yet.  I’m leaning toward hand sewing because it’s more subtle, but then I’m also lazy…. (no lie, those pins may stay in for a little while).

In unrelated news, I should be getting a new camera this weekend (!!!) so hopefully the picture quality will improve around here.

 

*You know what else Pinterest suggests?  Self-tanning with coco powder.  Yeah…. if you ever start feeling Pinterest envy, just remember that one.

**So Target only had one in stock when we were there earlier this week and it’s on the other window and not hemmed yet.  This one is a little short because it’s from the bathroom in our old Apartment, but you get the idea, right?

AT January Cure Week 3

Monday: 10 Minute Observation

Ok, this is possibly my least favorite assignment of the cure.  You tell me to sit quietly and think about a specific thing, I’ll probably space out and think about something else.  Maybe I’m a little ADD…. or just contrary.  Anyway, I tried pondering our dining room since that’s our next big project and within two minutes I was at my computer brainstorming ideas for the bedroom that I had previously been stumped on.  So now I have a bedroom plan in place so I’m still calling this a success.

Tuesday: Clean out a Closet

Give yourself 30 minutes to work on cleaning out a closet and then stop? DONE!  Our hall linen closet was starting to get a little out of hand so that seemed like a good thing to tackle. I organized and boxed all our first aid stuff and medications, refolded sheets, moved extra towels into our new bathroom closet, and pulled out a random piece of wood and 2 light fixture globes(???).  Spencer also decided to help out with this one.

ATCureCloset

Wednesday: Work on a project

I FINALLY got curtains done for the kitchen!  I chose to work on that because it seemed like a nice, doable evening project.  They’re a faux roman shade because, let’s be real here, I’m not going to be regularly adjusting the shade the behind the sideboard.  I hung sheers behind the shade to soften the view (busy-ish street, not too pretty) and provide a little privacy (see busy-ish street) while still letting light in.

ATCure2016Project

Thursday: Plan Your Get-together

I like this idea of having an end goal.  Just spent January getting your house back in order?  Celebrate when you’re done!  We’ve been meaning to have people over for Bibimbap for a while now so this seemed like a decent excuse to get it organized.  We don’t have a date set since we’re trying to coordinate with 3 couples, but the plan is in the works.

Weekend: Flowers + Bedroom

I finally replaced my first batch of flowers… well, added to since I’ve only had to toss a single stem so far.  I picked up a bunch of assorted greenery and some baby’s breath since I’m hoping for long-lasting again and I love the texture of the greenery.  There’s some eucalyptus in there so it smells pretty awesome too.

ATCureFlowers3

The bedroom was more difficult than the flowers… luckily(?) it was barely supposed to get above zero* this weekend so it’s not like I was going anywhere. I finally got my drawer dividers made, put away 2 baskets of clean clothing (that, yes, I have just been digging through in the morning), and washed all the bedding. I discovered the Oxyclean White over the summer and it is ah-ma-zing.  It’s color safe so you don’t have to worry about anything with a pattern, and it makes a HUGE different on dingy whites.

Everything got a good tidying and dusting (my most hated chore ever) and I hauled out everything that had no business being stored in the bedroom.  Ladder? Half of our tool collection? Curtain rods meant for the entire house? Really?

ATCure2016Bedroom

Ugh, I could not get the color balance in this photo to look decent, and this is the first time I’m showing a picture of the bedroom post-move-in.  It doesn’t look quite this drab in person but the yellow tones in the beige paint just bring everything around them down when I try and get pictures.  Don’t worry, I think this room’s up next for an overhaul after the dining room!  And I even have a plan now!

Also, full disclosure: dressers still need to be excavated. But look how good clean this half of the room looks, right????

 

 

*Minnesota: come for the hotdish, stay because your car doors just froze shut.

Bathroom Sources

Liked the bathroom reveal? Wondering where to get any of the things we used? Wonder no more–here’s our source list.

Paint

bathFinal4

Wainscoting + trim: Benjamin Moore Simply White (BM Advance, satin)

Walls: Benjamin Moore Opal Essence (Behr, eggshell)

Vanity cabinet + tub base: Benjamin Moore  French Beret (BM Advance, satin)

Tub feet: Martha Stewart Titanium (craft paint)

Fixtures

bathFinal3

Vanity: Lowes

Faucet: Kingston Brass

Knobs: Anthropologie

Light fixture: West Elm

 

Accessories

bathFinal1

Window panel: IKEA + a little DIY

Shower curtain: Urban Outfitters (no longer available)

Bathmat: IKEA

Towel Hooks: IKEA

bathFinal5

Wall Shelves: Home Depot

Hamper:  Home Goods (not available online)

Print: Flying Mouse 365 (this print no longer seems to be available)